In network installation services the most important and maybe the primary level is in connecting the cables. A lot of measures should be put in place to make sure the connections are made correctly as poor connection will affect the overall performance of the system in a wrong way. The users of the system will be able to see it working at its optimum best when the connections are made in the correct way. Any damage or short-circuit should be avoided in the process of installation so as to realize maximum productivity of the whole connection at http://www.ob-one.com/.
The twisted pair and the Ethernet being the most commonly used, it is important to understand all of them before choosing the most appropriate. Over many years that Ethernet has been used it has evolved a lot The most basic and maybe widely used is when it is used to do connections in and from the router. Connections to the router from the modem are and to other many computers from the router are through this regard. Some other connections might be different because of the size of the connection. Workstations can also be connected through cables to a permanently fixed panel on the wall. The cables connect the computers from the panel on the wall.
Such connections are made using patch cabling. A patch connection is where the cable used in the modem to router connection is a single cable, and it is connected to the wall of the Ethernet connection. On standard almost all connections that are made in the offices and homes are Ethernet cables. This makes the whole connection cheap because the wiring is usually solid. For all Ethernet connections, the acceptable modular connector is the RJ-45. To understand more about cable connectors, visit https://en.wikipedia.org/wiki/Optical_fiber_connector.
According to the issue that is to be solved the connectors differ with the user. Varying speeds can be attained depending on how the connector was manufactured and how it is configured. Different types of cables should be selected for each job and the type of connection available. The most used cable are the fiber optics, coaxial cable, and the twisted pair. Cable termination for the above three cables is different for all of them, and at the same time the connectors used for the cables will be different for each.
For instance, Cat5e is replacing Cat5 in the current industry standards. The four twisted pairs can attain 100MBPS speed. 1000MBPS can be achieved by using all the four pairs. Get info here!